Concept of Interlocking Brick Pavers

The key of interlocking is the inability of pavers to move independently from its neighbors. Interlocking concrete pavers was widely used in the Roman Empire. The roads were built with very tight fitted stones, focused on a compacted base. Today’s concrete pavers are produced to aid ensure an ideal interlock.

When designing or constructing your driveway, patio or pool deck, you need to take into consideration the interlocking system which is: Vertical, Rotational and Horizontal Interlock.

Vertical Interlock is achieved from the transfer of loads to the surrounding units from the sand that’s put in the joints.

Rotational Interlock may be enhanced from the pavement cross-section. This could cause the pavers to then stiff through loads over the entire pavement, increasing the structural capacity. Once this process created, the pavers will lock up.

Horizontal Interlock is achieved by using patterns that disperse forces on the vehicles. Studies have shown that Herringbone patterns will be the most reliable pattern for maintaining interlock. With that in mind, the Herringbone pattern is suggested in areas with heavy automobile traffic, like a driveway or perhaps a parking zone. Edge Restraints will also play an important part to the interlocking system. They take care of the horizontal interlock and are needed to be placed down the perimeter with the brick pavers.

Preparing the area in which the brick pavers is going to be placed also plays a crucial roll about the interlocking process. The excavation is approximately eight inches deep, four inches is for the Lime Rock. ? inches is perfect for the sand leaving 2 3/8 inches to the brick pavers. It is extremely crucial that the SAND and LIME ROCK are compacted which has a Vibratory Roller or which has a Reversible Plate Compactor and leveled out. When the pavers have established yourself, and also the restraint edge is placed across the paved area, sand is poured on top of the paved area, and it is once more compacted using the Vibratory Roller or with a Reversible Plate Compactor to ensure that areas in between each brick pavers are full of the sand, making the interlock system stronger.

The durability of brick pavers is much in excess of asphalt or concrete slabs. With asphalt or layer of concrete you’ll constantly have cracks. Do to the weather and movement in the soil. Making your weekends less enjoyable and frustrating, due to work that you will have to do through the use of crack fillers for the cracks. With pavers you will not have this challenge; they are strong and sturdy. The durability of brick pavers have to do with 20 to Two-and-a-half decades, along with the unlikable event that one pauses, it’s very simple to get replaced. Making brick pavers a very intelligent investment in your property.

For more info about landscaping contractors view the best site.

Leave a Reply