One of the primary things the do-it-yourselfer realizes when studying how to construct a drywall ceiling is no man can be an island – unless he makes use of rented equipment! For the reason that panels are big, bulky, and awkward, hanging drywall on the ceiling entails either: the aid of someone else or renting a drywall jack out of your local store. The cable mechanism on drywall jacks isn’t difficult to operate, and jacks do an outstanding job of holding the drywall in a secure, flat position enabling you to easier attach it towards the ceiling.
Tools & Materials
Building a Drywall Installation Video includes knowing what all tools and material you may need. As well as either someone else that may help you or possibly a drywall jack, included in the package need a hammer, a drill using a screwdriver bit, and nails or screws for drywall. You will also, needless to say, have to measure your ceiling (twice!) and get enough drywall, together with a little extra in the event of mistakes, to do the job.
Mark Joists First
Find the boards – usually 2x4s or 2x6s – that function as ceiling joists by tapping along the wall studs using a hammer and following up the wall towards the ceiling. In learning how to make a drywall ceiling, mark where these boards are placed using a pencil. They’re what you would be attaching the drywall to and marking them beforehand helps it be much easier to locate them than searching for them as you are nailing or screwing on the drywall. You then have to measure where the bulb proceeds the drywall and cut out a hole to accommodate that section of the ceiling.
The cruel Part
Its part in mastering how to construct a drywall ceiling where you may need the other person (who hopefully has lots of stamina in addition to strength!) to keep the drywall to the ceiling or squeeze drywall panel on the jack. Squeeze end from the sheet of drywall – having its finished side facing down – at the center from the ceiling board (joist) this agreement you will nail it. Nail around the not in the panel about a half an inch from the edges to stop the drywall from splitting or cracking. The one that is holding the panel can now move or, if you are utilizing a jack, you can move it of how.
Allow it to be Pretty
Countersink nails or screws at six- or seven-inch intervals all along the whole joist this agreement the drywall has been attached. Countersinking permits you to hide the heads from the nails/screws with compound to ensure that whenever you paint, the heads defintely won’t be in any respect visible. While not a real part of understanding how to construct a drywall ceiling, learning how to hide ugly nail or screw heads serves its very own purpose for overall general carpentry knowledge.
To read more about Drywall Installation Video view our new net page: look at this