SA-3 cylinder shape burrs are good for interior contour work and deburring. Due to extreme hardness with this tungsten carbide, technology-not only on considerably more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs usually are utilized on ferrous and non-ferrous metals, soft steel, as well as all non-metal materials for example stone, plastics, wood, and ceramic. Double cut burrs leaves a somewhat smoother finish than single cut due to producing smaller chips as they cut away the material. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is regarded as the popular cut and can look at you through most applications.
Machines Applied to:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Cast Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are ideal for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed will be determined from the material you are using your burr on. If you are experiencing chipping, you are most likely operating at too high of speed for your application. Start having a slower speed while increasing during this process before you reach the best results
Apply light pressure and permit the tool perform work. Bearing down on the tool can lead to reduced tool life plus a dull burr.
Always wear proper PPE to incorporate (and not restricted to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards in place in your machine.
Avoid use on electricity drills; the slower speeds can lead to chipping of your respective workpiece.
Check out about SA-3 Carbide Burrs you can check this popular web page