SA-3 cylinder shape burrs are ideal for interior contour work and deburring. As a result of extreme hardness of this tungsten carbide, quite a few on far more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs are generally suited for ferrous and non-ferrous metals, soft steel, and also for all non-metal materials including stone, plastics, hard wood, and ceramic. Double cut burrs will leave a somewhat smoother finish than single cut due to producing smaller chips as they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is regarded as the popular cut and may view you through most applications.
Machines Applied to:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Cast Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are great for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed will be determined from the material you’re using your burr on. If you happen to be experiencing chipping, you are most likely operating at excessive of speed for that application. Start which has a slower speed and increase during this process unless you attain the greatest results
Apply light pressure and allow the tool carry out the work. Bearing upon the tool can lead to reduced tool life along with a dull burr.
Always wear proper PPE to include (however, not limited to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards available in your machine.
Avoid use on electrical energy drills; the slower speeds can result in chipping of one’s workpiece.
For additional information about SA-3 Carbide Burrs you can check this useful webpage