Use tungsten carbide burrs on hard materials including steel, aluminum and certain, various stone, ceramic, porcelain, hard wood, acrylics, fibreglass and reinforced plastics. When used on soft metals including gold, platinum and silver, carbide burrs are excellent since they lasts for some time without breaking or chipping.
Different cuts of carbide burrs will be most suitable for certain materials.
Ways to use SB-3 Carbide Burr Die Grinder Bit
Use carbide burrs in air tools such as die grinders, pneumatic rotary tools as well as speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools such as a Dremel.
Carbide burrs are widely used for metalworking, tool making, engineering, model engineering, wood carving, jewelry making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. Carbide burrs are employed inside the aerospace, automotive, dentistry, stone and metalsmith industries.
What SB-3 Carbide Burr cut should you?
Single cut (one flute) carbide burrs have a very right handed (up cut) spiral flute. Single cut is used with stainless-steel, hardened steel, copper, surefire and ferrous metals and may remove material quickly which has a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy removal of material
Milling
Deburring
Cleaning
Creates long chips
Use double cut carbide burrs on ferrous and non ferrous metals, aluminium, soft steel and for all non-metal materials including stone, plastics, hard wood and ceramic. This cut has more cutting edges and will remove material faster. Double cut also called Diamond Cut or Cross Cut (2 flutes cut across one another) and will leave a smoother finish than single cut due to producing smaller chips while they cut away the fabric. Use double cut for medium-light stock removal, deburring, finishing and cleaning. Double cut carbide burrs are hottest and work with most applications.
Medium- light removing material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
What SB-3 Carbide Burr RPM speed the use of?
The rate from which you employ your carbide burr with your rotary tool is determined by the material you’re using it on as well as the contour being produced but it’s safe to say you don’t need more than 35,000 RPM. When the burs are chipping easily this could be due to speed being too slow. It’s ideal to start out the bur off slow, helping the speed in the process. High speeds prevents clogging from the flutes of your respective carbide burs.
As with every drill bits and burrs, allow burr perform work and apply merely a little pressure, otherwise the cutting edges from the flutes will chip away or become smooth prematurely, lowering the duration of your burr.
For more information about SB-3 Carbide Burrs see the best webpage